Chaeng New Sand Production Line promote the concrete industry

21 Apr,2020 UTC+8 Views:


Concrete is an important basic building material. It is usually made by mixing sand and water,which may contain admixtures and mixtures in a certain proportion and then stirring. Concrete has the characteristics of abundant raw materials, low prices, and simple production processes, thus making it increasingly demanded. Additionally, concrete has the characteristics of high compressive strength, good durability, and wide range of strength grades.These characteristics make it widely used in various civil engineering and shipbuilding, machinery industry, ocean development, geothermal engineering, etc.

In the field of common building materials, there are various requirements of stone and gravel in the concrete configuration. For concrete of strength C30 and above, the needle-like particles shall be not more than 15%, and its solidity (weight loss after 5 cycles of immersion in saturated sodium sulfate solution) shall be not more than 5% and its strength(crushing index) not more than 10%. For concrete C30-C60, frost-resistant and impermeable concrete, needle-like particles shall be not more than 20%, its solidity(weight loss after 5 cycles of immersion in saturated sodium sulfate solution) shall not more than 8%, and its its strength(crushing index) not more than 20%. For concrete of strength lower than C30, the needle-like particles shall be not more than 25%, its solidity((weight loss after 5 cycles of immersion in saturated sodium sulfate solution) shall be not more than 12% and its strength(crushing index) shall be not more than 30%.

The quality of sand determines the quality of the finished product of the concrete. How to do a good job from the very beginning and improve the quality of sand has become a concern for sand suppliers. Chaeng sand production line adopts new crushing and sand making equipment with high-efficiency and good granularity of finished products. It is the good choice for producing high-quality sand and gravel.

Chaeng stone crushing production line consists of vibrating feeder, crusher, vibrating screen, sand making machine, sand washing machine and belt conveyors. Production solutions can be customized to offer customer with efficient and systematic stone crushing line.

Jaw Crusher

This equipment is an efficient and energy-saving crushing equipment developed by chaeng based on many years of production experience. It is used for medium-size crushing of various ore and large materials, it can crush materials with compressive strength not greater than 320Mpa, which is the commonly applied in primary crushing. It is often combined with equipment such as impact crusher and sand makers to form sand production lines. It is widely used in mining, metallurgy, building materials, highways, railways, water conservancy and chemical industries.

Cone Crusher

Adopting the lamination crushing principle, the needle-like stones are crushed and the grain size is more uniform.The upgraded structure makes it more stable and reliable, convenient adjustment, strong practicability, high production efficiency, and can meet the production requirements of multiple industries.

Sand Making Machine

Impact crusher(sand making machine) is a new generation of crushing and sand making equipment developed by chaeng based on the actual situation of domestic construction materials. This equipment adopts the production mode of "rock on rock", while crushing the stone, the stone can be shaped to make the finished grain shape round. It has become a good choice to produce high-quality sand.